. 2017; 23(7): 912-918 | DOI: 10.5505/pajes.2017.33497 | |||
Meyve suyu endüstrisi katı atığından üretilen aktif karbonun sulu çözeltilerden reaktif kırmızı (procion red MX-5B) adsorpsiyonu için kullanımıEylem PehlivanBilecik Şeyh Edebali Üniversitesi, Mühendislik Fakültesi, Kimya ve Süreç Mühendisliği Bölümü, Bilecik, TürkiyeBu çalışmada; biyokütle olarak seçilen nar posasından kimyasal aktivasyonla aktif karbon üretimi gerçekleştirilmiştir. Aktif karbon üretiminde sıcaklık, emdirme süresi, emdirme oranı parametrelerinin etkisi araştırılmıştır. Aktivasyon deneyleri, kimyasal (KOH) kullanılarak, 500 °C ve 700 °C’de 0.5/1; 1/1; 2/1 emdirme oranlarında, 24 ve 48 sa. emdirme süresinde gerçekleştirilmiştir. Elde edilen aktif karbonlar BET, FTIR, elementel ve SEM analizleri yapılarak karakterize edilmiştir. En yüksek yüzey alanına sahip aktif karbon (668.98 m2/g) seçilerek, sulu çözeltiden boyar madde giderimi araştırılmıştır. pH, adsorban miktarı, çözelti başlangıç derişimi ve çözelti sıcaklığı gibi parametrelerin, adsorpsiyon üzerindeki etkileri gözlemlenmiştir En yüksek giderim pH 1’te, 10 g/L adsorban varlığında, 50 ppm başlangıç derişiminde, 25 °C’de %96.60 olarak bulunmuştur. Anahtar Kelimeler: Nar posası, Kimyasal Aktivasyon, Aktif Karbon, Adsorpsiyon, ModellemeUtilization of activated carbon produced from fruit juice industry solid waste for the adsorption of reactive red (procion red MX-5B) from aqueous solutionsEylem PehlivanBilecik Şeyh Edebali University, Engineering Faculty, Department of Chemical and Process, Bileci, TurkeyIn this study, activated carbon production from pomegranate pulp was carried out via chemical activation. The influences of parameters such as temperature, impregnation time, impregnation ratio on activated carbon production were investigated. Activation experiments were carried out using KOH at temperatures of 500 °C and 700 °C, with the impregnation ratio of 0.5/1; 1/1; 2/1 and impregnation duration of 24 or 48 hours. Activated carbons obtained from the experiments were characterized by BET, FTIR, elemental, and SEM. The activated carbon with the surface area of 668.9825 m2/g was obtained and used as an adsorbent for the removal of dye from the aqueous solutions. The influences of pH, adsorbent dose, initial dye concentration and temperature on adsorption were investigated. The maximum dye removal efficiency of 96.60% was obtained at the adsorbent dose of 10 g/L initial concentration of 50 ppm and a solution pH 1. Keywords: Pomegranate pulp, Activated carbon, Adsorption, ModellingEylem Pehlivan. Utilization of activated carbon produced from fruit juice industry solid waste for the adsorption of reactive red (procion red MX-5B) from aqueous solutions. . 2017; 23(7): 912-918 Sorumlu Yazar: Eylem Pehlivan, Türkiye |
|